Compressed air plant
Contents[hide] |
[edit] Introduction
There are a wide range of tools and plant on construction sites that use compressed air as their power source. The advantage that this equipment has is that the power source is very mobile and so they can be easily handled, which can be beneficial on isolated sites or in confined spaces.
The type of plant will depend on the nature of the work involved. The type of compressed air system can be either:
- Local: The compressor unit, with air-receiving tank, is mounted on a mobile unit for moving around the site.
- Centralised: A larger, semi-permanent compressor house is built to accommodate the plant and a network of air pipes taken to various outlet points.
[edit] Air compressors
The two main types of compressor are the reciprocating or piston type and the rotary impeller type.
[edit] Reciprocating compressor
This can be either single stage or multi-stage:
- Single stage: Air is drawn into the cylinder and a piston compresses it in one stroke.
- Multi-stage: Air passes through a series of cylinders, each of which contains air at increasing pressures.
Multi-stage compressors have the advantage of giving greater efficiency, and are suitable for high pressures and high volumes of air. This makes them useful for centralised plant, as the amount of compressed air can be as much as 130 m3 per minute.
[edit] Rotary compressor
These consist of a high-speed rotor mounted in a cylinder. Air is drawn in from an intake port by centrifugal force and exits through the delivery port when the required pressure has been achieved. Air receivers store the compressed air as it leaves the high pressure cylinder and minimise pressure fluctuations.
[edit] Tools and equipment
The four basic types of tools are:
[edit] Percussion type tools
- Concrete breakers (jack hammer): These are used for breaking up road surfaces. They consume air at a rate of 10-20 m3/min, and typically weigh 15-40 kg. They are flexible in terms of being able to be fitted with a variety of heads for different requirements.
- Pneumatic picks: Similar to concrete breakers but smaller and lighter. Typically they have an air consumption rate of around 6 m3/min.
- Backfill rammers: Used for backfilling trenches and have a consumption rate of around 10 m3/min.
- Chipping, caulking, riveting hammers: Small, lightweight tools with low air consumption of around 0.5 m3/min.
[edit] Pneumatic tools (with rotary action)
- Hammer drills: Used for wet or dry drilling, and commonly used for drilling rock or concrete. A rotary motion is generated by the piston, which produces the hammer action. Typically they have an air consumption rate of 5-10 m3/min.
- Rock drills: Larger and heavier than hammer drills, they are and commonly used for tunneling and quarry drilling. Their weight often necessitates the use of a frame support. They have an air consumption rate of around 15-24 m3/min.
[edit] Rotary type tools
These are powered by air motors with rotary sliding vanes. Common examples include; chainsaws, circular saws and wood-boring machines.
[edit] Miscellaneous tools
- Concrete vibrators.
- Concrete-placing and spraying equipment.
- Jacket-type silencers (these are often used as a means of dampening the noise created by compressed air equipment).
- Paint-spraying equipment.
- Pile-driving equipment.
- Road compactors.
- Sump pumps.
[edit] Related articles on Designing Buildings Wiki
- Bituminous mixing and laying plant.
- Breaker.
- BSRIA Compressor Study September 2020 - The Americas and China
- Cherry pickers.
- Concreting plant.
- Construction plant.
- Construction tools.
- Crane supports.
- Earth-moving plant.
- Equipment in buildings.
- EMEA compressor market 2020 - 2023.
- Excavating plant.
- Forklift truck.
- Hand-arm vibration syndrome.
- Hoist.
- Lift table.
- Pallet jack.
- Power float.
- Pumps and dewatering equipment.
- Road sweeper.
- Scabbler.
- Scaffolding.
- Six remarkable benefits of high pressure water jetting.
- Types of crane.
[edit] External references
- ‘Introduction to Civil Engineering Construction’ (3rd ed.), HOLMES, R., The College of Estate Management, (1995)
Featured articles and news
How can digital twins boost profitability within construction?
A brief description of a smart construction dashboard, collecting as-built data, as a s site changes forming an accurate digital twin.
Unlocking surplus public defence land and more to speed up the delivery of housing.
The Planning and Infrastructure bill oulined
With reactions from IHBC and others on its potential impacts.
Farnborough College Unveils its Half-house for Sustainable Construction Training.
Spring Statement 2025 with reactions from industry
Confirming previously announced funding, and welfare changes amid adjusted growth forecast.
Scottish Government responds to Grenfell report
As fund for unsafe cladding assessments is launched.
CLC and BSR process map for HRB approvals
One of the initial outputs of their weekly BSR meetings.
Architects Academy at an insulation manufacturing facility
Programme of technical engagement for aspiring designers.
Building Safety Levy technical consultation response
Details of the planned levy now due in 2026.
Great British Energy install solar on school and NHS sites
200 schools and 200 NHS sites to get solar systems, as first project of the newly formed government initiative.
600 million for 60,000 more skilled construction workers
Announced by Treasury ahead of the Spring Statement.
The restoration of the novelist’s birthplace in Eastwood.
Life Critical Fire Safety External Wall System LCFS EWS
Breaking down what is meant by this now often used term.
PAC report on the Remediation of Dangerous Cladding
Recommendations on workforce, transparency, support, insurance, funding, fraud and mismanagement.
New towns, expanded settlements and housing delivery
Modular inquiry asks if new towns and expanded settlements are an effective means of delivering housing.
Building Engineering Business Survey Q1 2025
Survey shows growth remains flat as skill shortages and volatile pricing persist.